Kimblade Windshield Care Kit – Glass Cleaner & Treatment Prep Kit (Wiper Blades Not Included)
Description
Protect your windshield and enhance moisture removal! KIMBLADE Windshield Cleaner (Oil Film Remover) and Windshield Treatment (Water-Repellent Coating) are designed with wiper compatibility in mind. These products allow you to use your wipers freely even after applying the coating, ensuring your glass remains in top condition while maintaining smooth, long-lasting wiping performance.
Experience clear visibility and smooth operation with our windshield kit offering superior oil film removal long-lasting water repellency and quiet performance.
Windshield wiper blades are not included. This kit is designed to clean and treat your windshield before installing new wiper blades (sold separately). It helps prepare the glass surface for optimal performance when using new wipers.
Windshield Cleaner Features
- Reduces light reflection and enhances windshield transparency by removing oil films.
- Removes contaminants from microscopic cracks in the glass.
- Easy-to-use, pouch-type application.
- Helps alleviate wiper shaking and noise.
- Best used before applying KIMBLADE Windshield Treatment or installing new wipers for optimal effectiveness.
Windshield Cleaner Precautions for Use
- Always wear gloves to protect your skin during application.
- Apply in a well-ventilated area to ensure safety.
- If the Cleaner dries on the windshield, lightly moisten the glass with water before proceeding.
- For best results, incorporate the Cleaner into your regular car washing routine.
The car's front windshield is especially vulnerable to contamination from tar specks, insects, and other factors.
Mixed with oils, these contaminants form an "oil film" on the windshield.
This film reduces wiper effectiveness and hampers driver visibility as contaminants solidify in the glass's tiny crevices.
Conventional glass cleaners often fail to tackle this oil film and can even make it worse. KIMBLADE Windshield Cleaner effectively removes this film, ensuring clear visibility.
When you use the KIMBLADE Windshield Cleaner, you'll notice right away how much more smoothly water flows over the glass surface. Standard glass cleaners, on the other hand, often struggle to eliminate sticky residues such as tar, all while falling short of KIMBLADE's cleansing power.
Includes
• Windshield Cleaner (Oil Film Remover)
• Windshield Treatment (Water-Repellent Coating)
• Buffing Towel (for Treatment application)
• Nitrile Gloves
Installation Video
Windshield Preparation: In order to maximize the lifespan and effectiveness of CarbonFit wiper blades, your vehicle's windshield must be treated with the included KIMBLADE windshield cleaner and windshield treatment. The following steps should be carried out before installing your new CarbonFit windshield wiper blades:
- Wash your vehicle. Use a microfiber wash mitt to scrub the windshield, ensuring all road debris is removed before proceeding.
- Shake or squeeze the included windshield cleaner pouch to ensure the solution is well combined. Remove the sponge from the inside of the cleaner pouch.
- Wipe the windshield with the sponge, applying force in a circular motion to absorb the cleaner fully. Apply the cleaner while the windshield is still wet.
- Thoroughly rinse the windshield until there are no remnants of the cleaning solution. Dry the windshield completely.
- Shake or squeeze the included windshield treatment pouch to ensure the solution is well combined. Remove the nonwoven fabric piece from the treatment pouch.
- Apply the treatment to the windshield. Make one pass in horizontal, side-to-side motion. Immediately follow up with a second vertical pass, applying the solution from top to bottom.
- After the solution develops into a "rainbow" tint, use the included buffing towel to remove the film. Make sure to wipe in a circular motion.
- The cleaning and treatment process has been completed. We recommend allowing the solution to cure for approximately 24 hours before installing your CarbonFit windshield wipers.
Windshield Cleaner
Windshield Treatment
Description
Protect your windshield and enhance moisture removal! KIMBLADE Windshield Cleaner (Oil Film Remover) and Windshield Treatment (Water-Repellent Coating) are designed with wiper compatibility in mind. These products allow you to use your wipers freely even after applying the coating, ensuring your glass remains in top condition while maintaining smooth, long-lasting wiping performance.
Experience clear visibility and smooth operation with our windshield kit offering superior oil film removal long-lasting water repellency and quiet performance.
Windshield wiper blades are not included. This kit is designed to clean and treat your windshield before installing new wiper blades (sold separately). It helps prepare the glass surface for optimal performance when using new wipers.
Windshield Cleaner Features
- Reduces light reflection and enhances windshield transparency by removing oil films.
- Removes contaminants from microscopic cracks in the glass.
- Easy-to-use, pouch-type application.
- Helps alleviate wiper shaking and noise.
- Best used before applying KIMBLADE Windshield Treatment or installing new wipers for optimal effectiveness.
Windshield Cleaner Precautions for Use
- Always wear gloves to protect your skin during application.
- Apply in a well-ventilated area to ensure safety.
- If the Cleaner dries on the windshield, lightly moisten the glass with water before proceeding.
- For best results, incorporate the Cleaner into your regular car washing routine.
The car's front windshield is especially vulnerable to contamination from tar specks, insects, and other factors.
Mixed with oils, these contaminants form an "oil film" on the windshield.
This film reduces wiper effectiveness and hampers driver visibility as contaminants solidify in the glass's tiny crevices.
Conventional glass cleaners often fail to tackle this oil film and can even make it worse. KIMBLADE Windshield Cleaner effectively removes this film, ensuring clear visibility.
When you use the KIMBLADE Windshield Cleaner, you'll notice right away how much more smoothly water flows over the glass surface. Standard glass cleaners, on the other hand, often struggle to eliminate sticky residues such as tar, all while falling short of KIMBLADE's cleansing power.
Includes
• Windshield Cleaner (Oil Film Remover)
• Windshield Treatment (Water-Repellent Coating)
• Buffing Towel (for Treatment application)
• Nitrile Gloves
Installation Video
Windshield Preparation: In order to maximize the lifespan and effectiveness of CarbonFit wiper blades, your vehicle's windshield must be treated with the included KIMBLADE windshield cleaner and windshield treatment. The following steps should be carried out before installing your new CarbonFit windshield wiper blades:
- Wash your vehicle. Use a microfiber wash mitt to scrub the windshield, ensuring all road debris is removed before proceeding.
- Shake or squeeze the included windshield cleaner pouch to ensure the solution is well combined. Remove the sponge from the inside of the cleaner pouch.
- Wipe the windshield with the sponge, applying force in a circular motion to absorb the cleaner fully. Apply the cleaner while the windshield is still wet.
- Thoroughly rinse the windshield until there are no remnants of the cleaning solution. Dry the windshield completely.
- Shake or squeeze the included windshield treatment pouch to ensure the solution is well combined. Remove the nonwoven fabric piece from the treatment pouch.
- Apply the treatment to the windshield. Make one pass in horizontal, side-to-side motion. Immediately follow up with a second vertical pass, applying the solution from top to bottom.
- After the solution develops into a "rainbow" tint, use the included buffing towel to remove the film. Make sure to wipe in a circular motion.
- The cleaning and treatment process has been completed. We recommend allowing the solution to cure for approximately 24 hours before installing your CarbonFit windshield wipers.
Windshield Cleaner
Windshield Treatment
Original: $25.00
-70%$25.00
$7.50Description
Description
Protect your windshield and enhance moisture removal! KIMBLADE Windshield Cleaner (Oil Film Remover) and Windshield Treatment (Water-Repellent Coating) are designed with wiper compatibility in mind. These products allow you to use your wipers freely even after applying the coating, ensuring your glass remains in top condition while maintaining smooth, long-lasting wiping performance.
Experience clear visibility and smooth operation with our windshield kit offering superior oil film removal long-lasting water repellency and quiet performance.
Windshield wiper blades are not included. This kit is designed to clean and treat your windshield before installing new wiper blades (sold separately). It helps prepare the glass surface for optimal performance when using new wipers.
Windshield Cleaner Features
- Reduces light reflection and enhances windshield transparency by removing oil films.
- Removes contaminants from microscopic cracks in the glass.
- Easy-to-use, pouch-type application.
- Helps alleviate wiper shaking and noise.
- Best used before applying KIMBLADE Windshield Treatment or installing new wipers for optimal effectiveness.
Windshield Cleaner Precautions for Use
- Always wear gloves to protect your skin during application.
- Apply in a well-ventilated area to ensure safety.
- If the Cleaner dries on the windshield, lightly moisten the glass with water before proceeding.
- For best results, incorporate the Cleaner into your regular car washing routine.
The car's front windshield is especially vulnerable to contamination from tar specks, insects, and other factors.
Mixed with oils, these contaminants form an "oil film" on the windshield.
This film reduces wiper effectiveness and hampers driver visibility as contaminants solidify in the glass's tiny crevices.
Conventional glass cleaners often fail to tackle this oil film and can even make it worse. KIMBLADE Windshield Cleaner effectively removes this film, ensuring clear visibility.
When you use the KIMBLADE Windshield Cleaner, you'll notice right away how much more smoothly water flows over the glass surface. Standard glass cleaners, on the other hand, often struggle to eliminate sticky residues such as tar, all while falling short of KIMBLADE's cleansing power.
Includes
• Windshield Cleaner (Oil Film Remover)
• Windshield Treatment (Water-Repellent Coating)
• Buffing Towel (for Treatment application)
• Nitrile Gloves
Installation Video
Windshield Preparation: In order to maximize the lifespan and effectiveness of CarbonFit wiper blades, your vehicle's windshield must be treated with the included KIMBLADE windshield cleaner and windshield treatment. The following steps should be carried out before installing your new CarbonFit windshield wiper blades:
- Wash your vehicle. Use a microfiber wash mitt to scrub the windshield, ensuring all road debris is removed before proceeding.
- Shake or squeeze the included windshield cleaner pouch to ensure the solution is well combined. Remove the sponge from the inside of the cleaner pouch.
- Wipe the windshield with the sponge, applying force in a circular motion to absorb the cleaner fully. Apply the cleaner while the windshield is still wet.
- Thoroughly rinse the windshield until there are no remnants of the cleaning solution. Dry the windshield completely.
- Shake or squeeze the included windshield treatment pouch to ensure the solution is well combined. Remove the nonwoven fabric piece from the treatment pouch.
- Apply the treatment to the windshield. Make one pass in horizontal, side-to-side motion. Immediately follow up with a second vertical pass, applying the solution from top to bottom.
- After the solution develops into a "rainbow" tint, use the included buffing towel to remove the film. Make sure to wipe in a circular motion.
- The cleaning and treatment process has been completed. We recommend allowing the solution to cure for approximately 24 hours before installing your CarbonFit windshield wipers.
Windshield Cleaner
Windshield Treatment
